Subject:  Configure ZXHN H268A 200/200 NBN Ethernet WAN
WoodrowKilns Common member Score::9 Registered on:2021-12-01	Configure ZXHN H268A 200/200 NBN Ethernet WAN (Published on:12/1/2021 10:19:22 AM)
	I am trying to configure a ZTE ZXHN H268A Home Gateway for an Australian 200/200 NBN Ethernet connection. The correct port from the NBN Service Access Switch is plugged into the WAN Port on the ZTE however, when I try to save the provided configuration in the "WAN - Ethernet - Ethernet Connection" page, I receive an error stating 'Current operation is invalid, please check configuration parameters.'

10047664 Administrator Score::4879 Registered on:2009-07-14	Reply:Configure ZXHN H268A 200/200 NBN Ethernet WAN (Published on:12/2/2021 8:50:23 AM)
	Correct subnet mask format   255.255.255.0      (24) 255.255.255.254 (31)

WoodrowKilns Common member Score::9 Registered on:2021-12-01	Reply:Configure ZXHN H268A 200/200 NBN Ethernet WAN (Published on:12/2/2021 6:06:41 AM)
	Additional detail: The subnet address is a /31 block. Is the software compatible with /31 or does it only support /30?

WoodrowKilns Common member Score::9 Registered on:2021-12-01	Reply:Configure ZXHN H268A 200/200 NBN Ethernet WAN (Published on:12/1/2021 10:57:55 AM)
	Attachment Download 20211201105744884.jpg

WoodrowKilns Common member Score::9 Registered on:2021-12-01	Reply:Configure ZXHN H268A 200/200 NBN Ethernet WAN (Published on:12/1/2021 10:57:24 AM)
	Hi, configuration screen shot attached. IP Address has been obfuscated.

10047664 Administrator Score::4879 Registered on:2009-07-14	Reply:Configure ZXHN H268A 200/200 NBN Ethernet WAN (Published on:12/1/2021 10:40:38 AM)
	Configuration Page Screenshot Thanks